# Difference between revisions of "Primitive"

(Pipeline page link.) |
(→Provoking vertex) |
||

Line 93: | Line 93: | ||

void {{apifunc|glProvokingVertex}}(GLenum {{param|provokeMode}}); | void {{apifunc|glProvokingVertex}}(GLenum {{param|provokeMode}}); | ||

− | {{param|provokeMode}} can be one of the two enumerators listed in the following table. This table defines which vertex index (using ''one-based indices'') is the provoking vertex for a particular primitive type. The {{param|i}} represents the ''one-based index'' of the primitive being drawn. For example, if you draw {{enum|GL_TRIANGLE_FANS}} with 5 vertices, {{param|i}} will range over [1, 3]. Thus, when using last vertex conventions, the provoking vertex of primitive index 2 will be the vertex index 4. | + | {{param|provokeMode}} can be one of the two enumerators listed in the following table; the default is {{enum|GL_LAST_VERTEX_CONVENTION}}. This table defines which vertex index (using ''one-based indices'') is the provoking vertex for a particular primitive type. The {{param|i}} represents the ''one-based index'' of the primitive being drawn. For example, if you draw {{enum|GL_TRIANGLE_FANS}} with 5 vertices, {{param|i}} will range over [1, 3]. Thus, when using last vertex conventions, the provoking vertex of primitive index 2 will be the vertex index 4. |

Again, this table uses ''one-based indices''. | Again, this table uses ''one-based indices''. |

## Revision as of 22:45, 14 October 2012

This article is missing information. Further details can be found on the talk page. |

**Primitives** are ways that OpenGL interprets vertex streams, converting them from vertices into triangles, lines, points, and so forth.

## Contents

## Vertex Stream

A vertex stream is an ordered list of vertices sent by an OpenGL drawing command. These get processed by a Vertex Shader into post-transform vertices.

Primitives define how OpenGL interprets a vertex stream. OpenGL can draw a vertex stream as points, lines or triangles. The primitive used to interpret a stream is given by the command used to render that stream.

## Point Primitives

There is only one kind of point primitive: GL_POINTS. This will cause OpenGL to interpret each individual vertex in the stream as a point.

Points are squares or circles of a given size. The size can be given in two methods: by the program or by the context's state. To switch between them, use glEnableglDisable(GL_PROGRAM_POINT_SIZE). If GL_PROGRAM_POINT_SIZE is enabled, then the point size comes from a built-in variable: float gl_PointSize. If it is disabled, the point size is constant for all points in a primitive, and is set by the glPointSize function.

Regardless of how the point size is defined, it must be greater than 0, or else undefined behavior results. There is an implementation-defined range for point sizes, and the size given by either method is clamped to that range. You can query the range with GL_POINT_SIZE_RANGE (returns 2 floats). There is also a point granularity that you can query with GL_POINT_SIZE_GRANULARITY; the implementation will clamp sizes to its granularity as needed.

### Point Fragment Inputs

Because a single point can generate multiple fragments, it is useful to know exactly where on the point a particular fragment is. A Fragment Shader gets the same input values for all user-defined inputs (gl_FragCoord will change, per the fragment's lcoation); therefore, the fragment shader must do its own interpolation.

To assist in this, the fragment shader can use the built-in input vec2 gl_PointCoord. This gives coordinates on the range [0, 1]. The location of (0, 0) depends on the point parameter setting for GL_POINT_SPRITE_COORD_ORIGIN: if it is set to GL_LOWER_LEFT, then (0, 0) is the bottom-left coordinate. While if it is GL_UPPER_LEFT, then (0, 0) is the top-left coordinate.

## Line Primitives

There are 3 kinds of line primitives, based on different interpretations of a vertex stream.

- GL_LINES: Vertices 0 and 1 are considered a line. Vertices 2 and 3 are considered a line. And so on. The user must specify an even number of vertices in the stream to use this.
- GL_LINE_STRIP: The adjacent vertices are considered lines. Thus, if you pass
*n*vertices, you will get*n*-1 lines. - GL_LINE_LOOP: As line strips, except that the first and last vertices are also used as a line. Thus, you get
*n*lines for*n*input vertices.

## Triangle Primitives

A triangle is a primitive formed by 3 vertices. It is the 2D shape with the smallest number of vertices, so renderers are typically designed to render them. Since it is created from only 3 vertices, it is also guaranteed to be planar.

There are 3 kinds of triangle primitives, based again on different interpretations of the vertex stream:

- GL_TRIANGLES: Vertices 0, 1, and 2 form a triangle. Vertices 3, 4, and 5 form a triangle. And so on. The vertex stream must be a number of vertices divisible by 3 to work.
- GL_TRIANGLE_STRIP: Every group of 3 adjacent vertices forms a triangle. The face direction of the strip is determined by the winding of the first triangle. A vertex stream of
*n*length will generate*n*-2 triangles. - GL_TRIANGLE_FAN: The first vertex is always held fixed. From there on, every group of 2 adjacent vertices form a triangle with the first. So with a vertex stream, you get a list of triangles like so: (0, 1, 2) (0, 2, 3), (0, 3, 4), etc. A vertex stream of
*n*length will generate*n*-2 triangles.

Here are some examples that can be more illustrative:

GL_TRIANGLES:

Indices: 0 1 2 3 4 5 ... Triangles: {0 1 2} {3 4 5}

GL_TRIANGLE_STRIP:

Indices: 0 1 2 3 4 5 ... Triangles: {0 1 2} {1 2 3} drawing order is (2 1 3) to maintain proper winding {2 3 4} {3 4 5} drawing order is (4 3 5) to maintain proper winding

GL_TRIANGLE_FAN:

Indices: 0 1 2 3 4 5 ... Triangles: {0 1 2} {0} {2 3} {0} {3 4} {0} {4 5}

## Quads

Warning: This section describes legacy OpenGL APIs that have been removed from core OpenGL 3.1 and above (they are only deprecated in OpenGL 3.0). It is recommended that you not use this functionality in your programs. |

A quad is a 4 vertex quadrilateral primitive. The four vertices are expected to be coplanar; failure to do so can lead to undefined results.

A quad is typically rasterized as a pair of triangles. This is not defined by the GL spec, but it is allowed by it. This can lead to some artifacts due to how vertex/geometry shader outputs are interpolated over the 2 generated triangles.

- GL_QUADS: Vertices 0-3 form a quad, vertices 4-7 form another, and so on. The vertex stream must be a number of vertices divisible by 4 to work.
- GL_QUAD_STRIP: Similar to triangle strips, a quad strip uses adjacent edges to form the next quad. In the case of quads, the third and fourth vertices of one quad are used as the edge of the next quad. So vertices 0-3 are a quad, 2-6 are a quad, and so on. A vertex stream of
*n*length will generate (*n*- 2) / 2 quads. As with triangle strips, the winding order of quads is changed for every other quad.

## Adjacency Primitives

These are special primitives that are expected to be used specifically with Geometry Shaders (GS). These primitives give the geometry shader more vertices to work with for each input primitive. Normally, when using any of the above primitives, the GS gets merely one of the base type. If you use a GS with a GL_TRIANGLE_STRIP, each execution of the GS will only see the 3 vertices of one particular triangle. These special primitive modes allow the GS to access vertex data for adjacent triangles.

## Patches

The GL_PATCH primitive type can only be used with Tessellation Shaders. It is a primitive with a user-defined number of vertices, which is then tessellated based on the control and evaluation shaders into regular points, lines, or triangles as appropriate.

The number of vertices per patch is defined by calling glPatchParameteri with GL_PATCH_VERTICES and some number of vertices, which must be less than GL_MAX_PATCH_VERTICES. If the number of vertices is v, then the system will interpret every v vertices as a separate patch, much like GL_LINES and GL_TRIANGLES.

## Provoking vertex

One of the vertices in an output primitive is designated the "provoking vertex". This vertex has special meanings for the primitive. For example, when using layered rendering, the only value written to gl_Layer that matters is the one output with the provoking vertex. Flat-shaded interpolated values also come from the provoking vertex.

Each primitive type differently defines which index in the vertex stream defines the provoking vertex for a particular output primitive. There is a way to change the provoking vertex convention (primarily for D3D compatibility):

void glProvokingVertex(GLenum provokeMode);

provokeMode can be one of the two enumerators listed in the following table; the default is GL_LAST_VERTEX_CONVENTION. This table defines which vertex index (using *one-based indices*) is the provoking vertex for a particular primitive type. The i represents the *one-based index* of the primitive being drawn. For example, if you draw GL_TRIANGLE_FANS with 5 vertices, i will range over [1, 3]. Thus, when using last vertex conventions, the provoking vertex of primitive index 2 will be the vertex index 4.

Again, this table uses *one-based indices*.

Primitive type | GL_FIRST_VERTEX_CONVENTION | GL_LAST_VERTEX_CONVENTION |
---|---|---|

GL_POINTS | i | i |

GL_LINES | 2i - 1 | 2i |

GL_LINE_LOOP | i | i + 1, if i < the number of vertices.
1 if i is equal to the number of vertices. |

GL_LINE_STRIP | i | i + 1 |

GL_TRIANGLES | 3i - 2 | 3i |

GL_TRIANGLE_STRIP | i | i + 2 |

GL_TRIANGLE_FAN | i + 1 | i + 2 |

GL_LINES_ADJACENCY | 4i - 2 | 4i - 1 |

GL_LINE_STRIP_ADJACENCY | i + 1 | i + 2 |

GL_TRIANGLES_ADJACENCY | 6i - 5 | 6i - 1 |

GL_TRIANGLE_STRIP_ADJACENCY | 2i - 1 | 2i + 3 |

Patches do not have a provoking vertex, since GL_PATCH can only be used with Tessellation Shaders.

## Primitive Restart

Setting a primitive restart index will cause the interpretation of the primitive to be reset when that index is reached in the vertex stream. The vertex data at that index will *not* be processed, nor will a vertex be inserted into the vertex stream for that index value.