Xfree86+GLX vs AccelX on a Matrox G450

Hi there.

I just setup X4.0.2 with GLX support for my Matrox G450 cards.

I have compiled the gears deme to use as a benchmark.

I am getting 146FPS maximum for the gears demo in Xfree86.

.

Now I downlaoded the AccelX 3D LGD for linux and installed it.

I dont have any GL based benchmark testers.

Can you all point me to some OpenGL benchmark testers for Linux.

Thank You.

Machine specs

Dual 800P3 with 512MB ram Matrox G450 Dual Head with 32mb .

I also have a dual PIII 800 w/ 1 GB of RAM and a Matrox G450.

I get 146 fps with gears, default window size, in software mode.

I get on the order of 600 fps with gears, default window size with DRI enabled.

Are you sure you have DRI enabled? Or did you resize the gears window to something much bigger than the default?

Originally posted by bunty:
[b]
Hi there.

I just setup X4.0.2 with GLX support for my Matrox G450 cards.

I have compiled the gears deme to use as a benchmark.

I am getting 146FPS maximum for the gears demo in Xfree86.
[/b]

I just recompiled X and the new g450 drivers and I even used -march=pentiumpro.

Enabled dri and I’m up to 150fps in the gears demo at the normal size.

Do you do anything abnormally ?

This is what I get from glxinfo:

display: :0.0 screen:0
direct rendering: No
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context
client glx vendor string: SGI
client glx version string: 1.2
client glx extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context,
GLX_ARB_get_proc_address
GLX extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context
OpenGL vendor string: VA Linux Systems, Inc.
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 Mesa 3.4
OpenGL extensions:
GL_ARB_multitexture, GL_ARB_texture_cube_map, GL_ARB_tranpose_matrix,
GL_EXT_abgr, GL_EXT_blend_color, GL_EXT_blend_func_separate,
GL_EXT_blend_logic_op, GL_EXT_blend_minmax, GL_EXT_blend_subtract,
GL_EXT_clip_volume_hint, GL_EXT_compiled_vertex_array, GL_EXT_histogram,
GL_EXT_packed_pixels, GL_EXT_paletted_texture, GL_EXT_point_parameters,
GL_EXT_polygon_offset, GL_EXT_rescale_normal,
GL_EXT_shared_texture_palette, GL_EXT_stencil_wrap, GL_EXT_texture3D,
GL_EXT_texture_env_add, GL_EXT_texture_env_combine, GL_EXT_texture_object,
GL_EXT_texture_lod_bias, GL_EXT_vertex_array, GL_HP_occlusion_test,
GL_INGR_blend_func_separate, GL_MESA_window_pos, GL_MESA_resize_buffers,
GL_NV_texgen_reflection, GL_PGI_misc_hints, GL_SGI_color_matrix,
GL_SGI_color_table, GL_SGIS_pixel_texture, GL_SGIS_texture_edge_clamp,
GL_SGIX_pixel_texture

visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat

0x23 24 tc 0 24 0 r y . 8 8 8 0 0 16 0 0 0 0 0 0 0 None
0x24 24 tc 0 24 0 r y . 8 8 8 0 0 16 8 16 16 16 0 0 0 None
0x25 24 dc 0 24 0 r y . 8 8 8 0 0 16 0 0 0 0 0 0 0 None
0x26 24 dc 0 24 0 r y . 8 8 8 0 0 16 8 16 16 16 0 0 0 None


To the top I notice it says :

direct rendering: No

I assume it should say yes.

What does your glxinfo return ?

I read the docs and did what they said.

this is the glx/dri section in my /etc/X11/XF86Config :

This loads the GLX module

Load       "glx"

This Loads the DRI module

Load       "dri"    

EndSection

Section “DRI”
Mode 0666
EndSection

What am I doing wrong ?

I also loaded the mga.o module for the kernel whcih I built from within the X source.

Ok. I captured the output from X and logged it. The first thing I notice is that it said that it only does direct rendering in 16 or 32 bit modes. So I changed my colour dept to 16bpp.

Welp my fps is up to 179fps, but I’m affraid dri is still not working.

Here is my X output.

XFree86 Version 4.0.2 / X Window System
(protocol Version 11, revision 0, vendor release 6400)
Release Date: 18 December 2000
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/FAQ))
Operating System: Linux 2.4.0 i686 [ELF]
Module Loader present
(==) Log file: “/var/log/XFree86.0.log”, Time: Wed Feb 14 06:59:15 2001
(==) Using config file: “/etc/X11/XF86Config”
Markers: (–) probed, () from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (??) unknown.
(==) ServerLayout “Simple Layout”
(
) |–>Screen “Screen 1” (0)
() | |–>Monitor “ViewSonic PF790”
(
) | |–>Device “Matrox Millenium G450”
() |–>Input Device “Mouse1”
(
) |–>Input Device “Keyboard1”
() XKB: rules: “xfree86”
(
) XKB: model: “pc104”
() XKB: layout: “us”
(
) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/m
(**) RgbPath set to “/usr/X11R6/lib/X11/rgb”
(==) ModulePath set to “/usr/X11R6/lib/modules”
(–) using VT number 7

(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor=“The XFree86 Project”
compiled for 4.0.2, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor=“The XFree86 Project”
compiled for 4.0.2, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor=“The XFree86 Project”
compiled for 4.0.2, module version = 0.1.0
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(–) PCI:*(1:0:0) Matrox MGA G400 AGP rev 130, Mem @ 0xf2000000/25, 0xfeafc000/1
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor=“The XFree86 Project”
compiled for 4.0.2, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor=“The XFree86 Project”
compiled for 4.0.2, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor=“The XFree86 Project”
compiled for 4.0.2, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor=“The XFree86 Project”
compiled for 4.0.2, module version = 1.1.8
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor=“The XFree86 Project”
compiled for 4.0.2, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor=“The XFree86 Project”
compiled for 4.0.2, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor=“The XFree86 Project”
compiled for 4.0.2, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor=“The XFree86 Project”
compiled for 4.0.2, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/drivers/mga_drv.o
(II) Module mga: vendor=“The XFree86 Project”
compiled for 4.0.2, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor=“The XFree86 Project”
compiled for 4.0.2, module version = 1.0.0
(II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w,
mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI, mgag400
(–) Assigning device section with no busID to primary device
(–) Chipset mgag400 found
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor=“The XFree86 Project”
compiled for 4.0.2, module version = 0.1.0
() MGA(0): Depth 16, (–) framebuffer bpp 16
(==) MGA(0): RGB weight 565
(II) Loading /usr/X11R6/lib/modules/drivers/mga_hal_drv.o
(II) Module mga_hal: vendor=“The XFree86 Project”
compiled for 4.0.2, module version = 1.0.0
(II) MGA(0): Matrox HAL module used
(–) MGA(0): Chipset: “mgag400”
(II) MGA(0): Offscreen memory usage will be limited to 512 lines if the DRI is e
(==) MGA(0): Using AGP Mode 1x
(–) MGA(0): Linear framebuffer at 0xF2000000
(–) MGA(0): MMIO registers at 0xFEAFC000
(–) MGA(0): Pseudo-DMA transfer window at 0xFE000000
(–) MGA(0): BIOS at 0xFEAC0000
(–) MGA(0): Video BIOS info block at offset 0x07720
(WW) MGA(0): Video BIOS info block not detected!
(
) MGA(0): VideoRAM: 32678 kByte
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor=“The XFree86 Project”
compiled for 4.0.2, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor=“The XFree86 Project”
compiled for 4.0.2, module version = 1.2.0
(WW) MGA(0): Failed to set up write-combining range (0xf2000000,0x1fe9800)
(II) MGA(0): I2C bus “DDC” initialized.
(II) MGA(0): I2C device “DDC:ddc2” registered.
(II) MGA(0): I2C device “DDC:ddc2” removed.
(II) MGA(0): I2C Monitor info: (nil)
(II) MGA(0): end of I2C Monitor info

(–) MGA(0): No DDC signal
(II) MGA(0): DDC Monitor info: (nil)
(II) MGA(0): end of DDC Monitor info

(==) MGA(0): Using gamma correction (1.0, 1.0, 1.0)
(==) MGA(0): Min pixel clock is 12 MHz
(==) MGA(0): Max pixel clock is 360 MHz
(II) MGA(0): ViewSonic PF790: Using hsync range of 30.00-97.00 kHz
(II) MGA(0): ViewSonic PF790: Using vrefresh range of 50.00-160.00 Hz
(II) MGA(0): Clock range: 12.00 to 360.00 MHz
(WW) MGA(0): Default mode “1024x768” deleted (bad mode clock/interlace/doublesca
(WW) MGA(0): Default mode “1600x1200” deleted (hsync out of range)
(WW) MGA(0): Default mode “1792x1344” deleted (hsync out of range)
(WW) MGA(0): Default mode “1856x1392” deleted (hsync out of range)
(WW) MGA(0): Default mode “1920x1440” deleted (hsync out of range)
(WW) MGA(0): Failed to set up write-combining range (0xf2000000,0x1fe9800)
(–) MGA(0): Has SDRAM
(–) MGA(0): Virtual size is 1280x1024 (pitch 1280)
() MGA(0): Default mode “1280x1024”: 157.5 MHz, 91.1 kHz, 85.0 Hz
(==) MGA(0): DPI set to (75, 75)
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor=“The XFree86 Project”
compiled for 4.0.2, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor=“The XFree86 Project”
compiled for 4.0.2, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor=“The XFree86 Project”
compiled for 4.0.2, module version = 0.1.0
(WW) MGA(0): Failed to set up write-combining range (0xf2000000,0x1fe9800)
(–) MGA(0): 16 DWORD fifo
(==) MGA(0): Default visual is TrueColor
(II) MGA(0): [drm] bpp: 16 depth: 16
(II) MGA(0): [drm] Sarea 2196+632: 2828
(0): [drm] created “mga” driver at busid “PCI:1:0:0”
(0): [drm] added 4096 byte SAREA at 0xc9a33000
(0): [drm] mapped SAREA 0xc9a33000 to 0x40018000
(0): [drm] drmAddMap failed
(EE) MGA(0): [drm] DRIScreenInit Failed
(II) MGA(0): Using 5529 lines for offscreen memory.
(II) MGA(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid filled trapezoids
8x8 mono pattern filled rectangles
8x8 mono pattern filled trapezoids
Indirect CPU to Screen color expansion
Screen to Screen color expansion
Solid Lines
Dashed Lines
Scanline Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(==) MGA(0): Backing store disabled
(==) MGA(0): Silken mouse enabled
(II) MGA(0): Using overlay video
(II) MGA(0): direct rendering disabled
(
) Mouse1: Protocol: “Microsoft”
() Mouse1: Core Pointer
(==) Mouse1: Buttons: 3
(
) Mouse1: BaudRate: 1200
(II) Keyboard “Keyboard1” handled by legacy driver
(II) XINPUT: Adding extended input device “Mouse1” (type: MOUSE)


I notice that it says coming to the end:

(EE) MGA(0): [drm] DRIScreenInit Failed

and also

(II) MGA(0): direct rendering disabled

.

Does anyone know what I’m doing wrong ?
Any help will be greatly appreciated.

Make sure you are using the latest mga.o kernel module and the agpgart.o kernel module.

Lots more help available at Matrox Tech Support .

ok, the matrox docs said to build one from X.

I have kernel 2.4.1.

Now I have agpgart built into the kernel.
Should I take it out and use a module instead ?

I will attempt it with modules. Thanks
I’ll remove the mga module i built from X.

Thanks

Ok, that’s a no go on the kernel modules

Originally posted by bunty:
ok, the matrox docs said to build one from X.

Yeah… that’s what I meant. Build the mga.o in X (it lives in xc/programs/Xserver/hw/os-support/linux) and install it.


Now I have agpgart built into the kernel.
Should I take it out and use a module instead ?

Matter of taste, I think.

Anyways, like I said, check out the Matrox Forum, lots of help in there.

[This message has been edited by rts (edited 02-14-2001).]

This topic was automatically closed 183 days after the last reply. New replies are no longer allowed.