OpenGL Call of Duty Problem-ATI Rage

I am running a Dell OptiPlex G1, PIII, 256 K, Windows 98, with an ATI Rage Pro Turbo AGP 2X. I get this message when I run Call of Duty:
Could not load OpenGL. Make sure you have the latest drivers from the manufacturers website.

COD 1.0 build win-x86 Oct 5 2003
----- FS_Startup -----
Current language: english
Current search path:
C:\Program Files\Call of Duty\main\pak6.pk3 (3 files)
C:\Program Files\Call of Duty\main\pak5.pk3 (4858 files)
C:\Program Files\Call of Duty\main\pak4.pk3 (1668 files)
C:\Program Files\Call of Duty\main\pak3.pk3 (1992 files)
C:\Program Files\Call of Duty\main\pak2.pk3 (694 files)
C:\Program Files\Call of Duty\main\pak1.pk3 (2642 files)
C:\Program Files\Call of Duty\main\pak0.pk3 (12828 files)
C:\Program Files\Call of Duty/main
C:\Program Files\Call of Duty\main\localized_english_pak1.pk3 (3736 files)
localized assets pak file for english
C:\Program Files\Call of Duty\main\localized_english_pak0.pk3 (1204 files)
localized assets pak file for english

File Handles:

29625 files in pk3 files
execing default.cfg
couldn’t exec language.cfg
couldn’t exec config.cfg
couldn’t exec autoexec.cfg
========= autoconfigure
configure.csv: using configuration 0 cpu MHz 256 sys MB 32 vid MB
execing configure.cfg
fs_basepath is write protected.
fs_homepath is write protected.
Hunk_Clear: reset the hunk ok
…detecting CPU, found Intel Pentium III
Measured CPU speed is 0.60 GHz
System memory is 256 MB (capped at 1 GB)
Video card memory is 4 MB
Streaming SIMD Extensions (SSE) supported

----- Client Initialization -----
----- Initializing Renderer ----

----- Client Initialization Complete -----
----- R_Init -----
Initializing OpenGL subsystem
…initializing QGL
…calling LoadLibrary( ‘C:\WINDOWS\SYSTEM\opengl32.dll’ ): succeeded
…setting mode 3: 640 480 FS
…using colorbits of 32
…calling CDS: ok
…registered window class
…created window@0,0 (640x480)
Initializing OpenGL driver
…getting DC: succeeded
…GLW_ChoosePFD( 32, 24, 8 )
…23 PFDs found
…GLW_ChoosePFD failed
…GLW_ChoosePFD( 16, 24, 0 )
…23 PFDs found
…GLW_ChoosePFD failed
…failed to find an appropriate PIXELFORMAT
…restoring display settings
…WARNING: could not set the given mode (3)
…shutting down QGL
…unloading OpenGL DLL
----- CL_Shutdown -----
RE_Shutdown( 1 )

Hunk_Clear: reset the hunk ok
Could not load OpenGL. Make sure that you have the latest drivers for your video card from the manufacturer’s web site.

Sorry to say that, but your system doesnt even come close to the minimum system requirements (especially your 3d card).

MINIMUM CONFIGURATION

3D Hardware Accelerator Card required – 100% DirectX® 9.0a compatible 32MB Hardware T&L-capable video card and drivers*
Pentium® III 700 or Athlon™processor or higher
English version of Microsoft® Windows® 98/98SE/ME/2000/XP
128MB of RAM
8x Speed CD-ROM drive (1200KB/sec sustained transfer rate) and drivers
181MB of uncompressed free hard disk space (plus 200MB for Windows swap file)
100% DirectX® 9.0a compatible 16 bit sound card and drivers
100% Windows® 98/98SE/ME/2000/XP compatible mouse, keyboard and drivers
DirectX® 9.0a (not included)

Important Note: *Some 3D accelerator cards with the chipset’s listed here may not be compatible with the 3D acceleration features utilized by Call Of Duty. Please refer to your hardware manufacturer for 100% DirectX 9.0 compatibility.

SUPPORTED CHIPSETS:
ATI® Radeon 7200, 8500, 9000, 9500, 9700, 9800
All NVidia® GeForce™/Geforce FX chipset’s

RECOMMENDED

Pentium® III 1000 or Athlon™processor or higher
Graphics NVidia Geforce/ FX or Ati Radeon = 128 mb or higher
English version of Microsoft® Windows® 98/98SE/ME/2000/XP
256MB of RAM
52x Speed CD-ROM drive
100% DirectX® 9.0a compatible 16 bit sound card and drivers
100% Windows® 98/98SE/ME/2000/XP compatible mouse, keyboard and drivers
DirectX® 9.0a (not included)

You got a 600Mhz P3 with an 4MB 3d card and no hardware TnL.

Sorry.

I get a slightly different error, but I got over some of the requirements. I have a 1 GhZ and a 16MB video card but it asks me to update video drivers which I did but I get the same error? Please help

Originally posted by InfamousChris:
I get a slightly different error, but I got over some of the requirements. I have a 1 GhZ and a 16MB video card but it asks me to update video drivers which I did but I get the same error? Please help

3D Hardware Accelerator Card required – 100% DirectX® 9.0a compatible 32MB Hardware T&L-capable video card and drivers*

What about ATI Xpert2000 with 32 Mb of RAM? Where can I learn if the card has HW T&L?

Originally posted by Justone:
What about ATI Xpert2000 with 32 Mb of RAM? Where can I learn if the card has HW T&L?

It doesn’t. Integrated Transformation, Clipping and Lighting (T&L) started with the 7xxx series.

That’s why the 7xxx series is supported and the older Rage 128 chips (like yours) are not.

Seriously, for $29 at pricewatch.com, you can have a card that’s at least twice the power of that old Xpert2000.