Name EXT_texture_compression_s3tc Name Strings GL_EXT_texture_compression_s3tc Contributors Pat Brown, NVIDIA Corporation (pbrown 'at' nvidia.com) Ian Stewart, NVIDIA Corporation (istewart 'at' nvidia.com) Nicholas Haemel, NVIDIA Corporation Acorn Pooley, NVIDIA Corporation Antti Rasmus, NVIDIA Corporation Musawir Shah, NVIDIA Corporation Contact Pat Brown, NVIDIA Corporation (pbrown 'at' nvidia.com) Slawomir Grajewski, INTEL (slawomir.grajewski 'at' intel.com) Status FINAL Version 1.6, 15 July 2013 Number OpenGL Extension #198 OpenGL ES Extension #154 Dependencies OpenGL dependencies: OpenGL 1.1 is required. GL_ARB_texture_compression is required. This extension is written against the OpenGL 1.2.1 Specification. This extension interacts with OpenGL 2.0 and ARB_texture_non_power_of_two. OpenGL ES dependencies: This extension is written against the OpenGL ES 2.0.25 Specification and OpenGL ES 3.0.2 Specification. This extension applied to OpenGL ES 2.0.25 Specification interacts with NV_texture_array. Overview This extension provides additional texture compression functionality specific to S3's S3TC format (called DXTC in Microsoft's DirectX API), subject to all the requirements and limitations described by the extension GL_ARB_texture_compression. This extension supports DXT1, DXT3, and DXT5 texture compression formats. For the DXT1 image format, this specification supports an RGB-only mode and a special RGBA mode with single-bit "transparent" alpha. IP Status Contact S3 Incorporated (http://www.s3.com) regarding any intellectual property issues associated with implementing this extension. WARNING: Vendors able to support S3TC texture compression in Direct3D drivers do not necessarily have the right to use the same functionality in OpenGL. Issues (1) Should DXT2 and DXT4 (premultiplied alpha) formats be supported? RESOLVED: No -- insufficient interest. Supporting DXT2 and DXT4 would require some rework to the TexEnv definition (maybe add a new base internal format RGBA_PREMULTIPLIED_ALPHA) for these formats. Note that the EXT_texture_env_combine extension (which extends normal TexEnv modes) can be used to support textures with premultipled alpha. (2) Should generic "RGB_S3TC_EXT" and "RGBA_S3TC_EXT" enums be supported or should we use only the DXT enums? RESOLVED: No. A generic RGBA_S3TC_EXT is problematic because DXT3 and DXT5 are both nominally RGBA (and DXT1 with the 1-bit alpha is also) yet one format must be chosen up front. (3) Should TexSubImage support all block-aligned edits or just the minimal functionality required by the ARB_texture_compression extension? RESOLVED: Allow all valid block-aligned edits. (4) A pre-compressed image with a DXT1 format can be used as either an RGB_S3TC_DXT1 or an RGBA_S3TC_DXT1 image. If the image has transparent texels, how are they treated in each format? RESOLVED: The renderer has to make sure that an RGB_S3TC_DXT1 format is decoded as RGB (where alpha is effectively one for all texels), while RGBA_S3TC_DXT1 is decoded as RGBA (where alpha is zero for all texels with "transparent" encodings). Otherwise, the formats are identical. (5) Is the encoding of the RGB components for DXT1 formats correct in this spec? MSDN documentation does not specify an RGB color for the "transparent" encoding. Is it really black? RESOLVED: Yes. The specification for the DXT1 format initially required black, but later changed that requirement to a recommendation. All vendors involved in the definition of this specification support black. In addition, specifying black has a useful behavior. When blending multiple texels (GL_LINEAR filtering), mixing opaque and transparent samples is problematic. Defining a black color on transparent texels achieves a sensible result that works like a texture with premultiplied alpha. For example, if three opaque white and one transparent sample is being averaged, the result would be a 75% intensity gray (with an alpha of 75%). This is the same result on the color channels as would be obtained using a white color, 75% alpha, and a SRC_ALPHA blend factor. (6) Is the encoding of the RGB components for DXT3 and DXT5 formats correct in this spec? MSDN documentation suggests that the RGB blocks for DXT3 and DXT5 are decoded as described by the DXT1 format. RESOLVED: Yes -- this appears to be a bug in the MSDN documentation. The specification for the DXT2-DXT5 formats require decoding using the opaque block encoding, regardless of the relative values of "color0" and "color1". New Procedures and Functions None. New Tokens This extension introduces new tokens: COMPRESSED_RGB_S3TC_DXT1_EXT 0x83F0 COMPRESSED_RGBA_S3TC_DXT1_EXT 0x83F1 COMPRESSED_RGBA_S3TC_DXT3_EXT 0x83F2 COMPRESSED_RGBA_S3TC_DXT5_EXT 0x83F3 In OpenGL 1.2.1 these tokens are accepted by the parameter of TexImage2D, CopyTexImage2D, and CompressedTexImage2D and the parameter of CompressedTexSubImage2D. In extended OpenGL ES 2.0.25 these new tokens are accepted by the parameter of TexImage2D, CompressedTexImage2D and the parameter of CompressedTexSubImage2D. In extended OpenGL ES 3.0.2 these new tokens are also accepted by the parameter of TexImage3D, CompressedTexImage3D, TexStorage2D, TexStorage3D and the parameter of CompressedTexSubImage3D. Additions to Chapter 2 of the OpenGL 1.2.1 Specification (OpenGL Operation) None. Additions to Chapter 3 of the OpenGL 1.2.1 Specification (Rasterization) Add to Table 3.16.1: Specific Compressed Internal Formats Compressed Internal Format Base Internal Format ========================== ==================== COMPRESSED_RGB_S3TC_DXT1_EXT RGB COMPRESSED_RGBA_S3TC_DXT1_EXT RGBA COMPRESSED_RGBA_S3TC_DXT3_EXT RGBA COMPRESSED_RGBA_S3TC_DXT5_EXT RGBA Modify Section 3.8.2, Alternate Image Specification (add to end of TexSubImage discussion, p.123 -- after edit from the ARB_texture_compression spec) If the internal format of the texture image being modified is COMPRESSED_RGB_S3TC_DXT1_EXT, COMPRESSED_RGBA_S3TC_DXT1_EXT, COMPRESSED_RGBA_S3TC_DXT3_EXT, or COMPRESSED_RGBA_S3TC_DXT5_EXT, the texture is stored using one of the several S3TC compressed texture image formats. Such images are easily edited along 4x4 texel boundaries, so the limitations on TexSubImage2D or CopyTexSubImage2D parameters are relaxed. TexSubImage2D and CopyTexSubImage2D will result in an INVALID_OPERATION error only if one of the following conditions occurs: * is not a multiple of four, plus is not equal to TEXTURE_WIDTH, and either or is non-zero; * is not a multiple of four, plus is not equal to TEXTURE_HEIGHT, and either or is non-zero; or * or is not a multiple of four. The contents of any 4x4 block of texels of an S3TC compressed texture image that does not intersect the area being modified are preserved during valid TexSubImage2D and CopyTexSubImage2D calls. Add to Section 3.8.2, Alternate Image Specification (adding to the end of the CompressedTexImage section introduced by the ARB_texture_compression spec) If is COMPRESSED_RGB_S3TC_DXT1_EXT, COMPRESSED_RGBA_S3TC_DXT1_EXT, COMPRESSED_RGBA_S3TC_DXT3_EXT, or COMPRESSED_RGBA_S3TC_DXT5_EXT, the compressed texture is stored using one of several S3TC compressed texture image formats. The S3TC texture compression algorithm supports only 2D images without borders. CompressedTexImage1DARB and CompressedTexImage3DARB produce an INVALID_ENUM error if is an S3TC format. CompressedTexImage2DARB will produce an INVALID_OPERATION error if is non-zero. Add to Section 3.8.2, Alternate Image Specification (adding to the end of the CompressedTexSubImage section introduced by the ARB_texture_compression spec) If the internal format of the texture image being modified is COMPRESSED_RGB_S3TC_DXT1_EXT, COMPRESSED_RGBA_S3TC_DXT1_EXT, COMPRESSED_RGBA_S3TC_DXT3_EXT, or COMPRESSED_RGBA_S3TC_DXT5_EXT, the texture is stored using one of the several S3TC compressed texture image formats. Since the S3TC texture compression algorithm supports only 2D images, CompressedTexSubImage1DARB and CompressedTexSubImage3DARB produce an INVALID_ENUM error if is an S3TC format. Since S3TC images are easily edited along 4x4 texel boundaries, the limitations on CompressedTexSubImage2D are relaxed. CompressedTexSubImage2D will result in an INVALID_OPERATION error only if one of the following conditions occurs: * is not a multiple of four, and plus is not equal to TEXTURE_WIDTH; * is not a multiple of four, and plus is not equal to TEXTURE_HEIGHT; or * or is not a multiple of four. The contents of any 4x4 block of texels of an S3TC compressed texture image that does not intersect the area being modified are preserved during valid TexSubImage2D and CopyTexSubImage2D calls. Additions to Chapter 4 of the OpenGL 1.2.1 Specification (Per-Fragment Operations and the Frame Buffer) None. Additions to Chapter 5 of the OpenGL 1.2.1 Specification (Special Functions) None. Additions to Chapter 6 of the OpenGL 1.2.1 Specification (State and State Requests) None. Additions to Appendix A of the OpenGL 1.2.1 Specification (Invariance) None. Additions to Chapter 3 of the OpenGL ES 2.0.25 Specification Modify Section 3.7.1, Texture Image Specification (change last paragraph on Page 67 as follows) Components are then selected from the resulting R, G, B, or A values to obtain a texture with the base internal format specified by , which must match except when is TEXTURE_2D and is one of the following compressed formats: COMPRESSED_RGB_S3TC_DXT1_EXT, COMPRESSED_RGBA_S3TC_DXT1_EXT, COMPRESSED_RGBA_S3TC_DXT3_EXT, or COMPRESSED_RGBA_S3TC_DXT5_EXT. In this case, conversion from only RGB and RGBA formats are supported during texture image processing. values other than RBA or RGBA will result in the INVALID_OPERATION error. In all other cases where does not match , the error INVALID_OPERATION is generated. Table 3.8 summarizes the mapping of R, G, B, and A values to texture components, as a function of the base internal format of the texture image. may be one of the five internal format symbolic constants listed in table 3.8 or the four compressed formats: COMPRESSED_RGB_S3TC_DXT1_EXT, COMPRESSED_RGBA_S3TC_DXT1_EXT, COMPRESSED_RGBA_S3TC_DXT3_EXT, or COMPRESSED_RGBA_S3TC_DXT5_EXT. Specifying a value for that is not one of the above values generates the error INVALID_VALUE. When a compressed is specified, a compressed texture is created and all the associated restrictions mentioned in Section 3.7.3 are imposed. Note that when encoding an RGBA image into a format using 1-bit alpha, any texels with an alpha component less than 0.5 end up with an alpha of 0.0 and any texels with an alpha component greater than or equal to 0.5 end up with an alpha of 1.0. When encoding an RGBA image into the COMPRESSED_RGBA_S3TC_DXT1_EXT format, the resulting red, green, and blue components of any texels with a final alpha of 0.0 will automatically be zero (black). If this behavior is not desired by an application, it should not use COMPRESSED_RGBA_S3TC_DXT1_EXT. Modify Section 3.7.2, Alternate Texture Image Specification Commands (add to the end of section) When the internal format of the texture object is COMPRESSED_RGB_S3TC_DXT1_EXT, COMPRESSED_RGBA_S3TC_DXT1_EXT, COMPRESSED_RGBA_S3TC_DXT3_EXT, or COMPRESSED_RGBA_S3TC_DXT5_EXT, the update region specified in TexSubImage2D must be aligned to 4x4 pixel blocks. If or are not multiples of 4 an INVALID_OPERATION error is generated. If is not a multiple of 4 and + is not equal to the width of the LOD then an INVALID_OPERATION error is generated. If is not a multiple of 4 and + is not equal to the height of the LOD then an INVALID_OPERATION error is generated. Modify Section 3.7.3, "Compressed Texture Images" (Replace first two sentences with) Texture images may also be specified or modified using image data already stored in a known compressed image format. The GL defines some specific compressed formats, and others may be defined by GL extensions. (Insert after section describing CompressedTexImage2D) The specific compressed texture formats supported by CompressedTexImage2D, and the corresponding base internal format for each specific format, are defined in table 3.X. Table 3.X: "Specific compressed texture formats" Compressed Internal Formats Base Internal Format =========================== ==================== COMPRESSED_RGB_S3TC_DXT1_EXT RGB COMPRESSED_RGBA_S3TC_DXT1_EXT RGBA COMPRESSED_RGBA_S3TC_DXT3_EXT RGBA COMPRESSED_RGBA_S3TC_DXT5_EXT RGBA (Replace last paragraph with) If the internal format is one of COMPRESSED_RGB_S3TC_DXT1_EXT, COMPRESSED_RGBA_S3TC_DXT1_EXT, COMPRESSED_RGBA_S3TC_DXT3_EXT, or COMPRESSED_RGBA_S3TC_DXT5_EXT, the compressed texture is stored using one of several S3TC compressed texture image formats and is easily edited along 4x4 texel boundaries. In this case, CompressedTexSubImage2D will result in an INVALID_OPERATION error if one of the following conditions occurs: * is not a multiple of four, and plus is not equal to texture width; * is not a multiple of four, and plus is not equal to texture height; or * or is not a multiple of four. For any other formats, calling CompressedTexSubImage2D will result in an INVALID_OPERATION error if or is not equal to zero, or if and do not match the width and height of the texture, respectively. The contents of any texel outside the region modified by the call are undefined. These restrictions may be relaxed for other specific compressed internal formats whose images are easily modified. Additions to Chapter 4 of the OpenGL ES 2.0.25 Specification (Per-Fragment Operations and the Framebuffer) Modify Section 4.4.3, Attaching Texture Images to a Framebuffer (add after last paragraph on Page 113) If is not zero and the internal format of the corresponding texture object is a compressed format, an INVALID_OPERATION error is generated. Interactions of extended OpenGL ES 2.0.25 with NV_texture_array If NV_texture_array is supported, the S3TC compressed formats may also be used as the internal formats given to CompressedTexImage3DNV and CompressedTexSubImage3DNV. The restrictions for the , , , and parameters of the CompressedTexSubImage2D function when used with S3TC compressed texture formats, described in this extension, also apply to the identically named parameters of CompressedTexSubImage3DNV. Additions to Chapter 3 of the OpenGL ES 3.0.2 Specification Modify Section 3.8.3, "Texture Image Specification" (Modify paragraph starting with "Components are then selected") Components are then selected from the resulting R, G, B, A, depth, or stencil values to obtain a texture with the base internal format specified by (or derived from) internalformat. Table 3.11 summarizes the mapping of R, G, B, A, depth, or stencil values to texture components, as a function of the base internal format of the texture image. For internalformat different than COMPRESSED_RGB_S3TC_DXT1_EXT, COMPRESSED_RGBA_S3TC_DXT1_EXT, COMPRESSED_RGBA_S3TC_DXT3_EXT, or COMPRESSED_RGBA_S3TC_DXT5_EX specifying a combination of values for format, type, and internalformat that is not listed as a valid combination in tables 3.2 or 3.3 generates the error INVALID_OPERATION. For internalformat equal COMPRESSED_RGB_S3TC_DXT1_EXT, COMPRESSED_RGBA_S3TC_DXT1_EXT, COMPRESSED_RGBA_S3TC_DXT3_EXT, or COMPRESSED_RGBA_S3TC_DXT5_EXT only RGB and RGBA formats are supported during texture image processing and for these internalformat values values other than RBA or RGBA will result in the INVALID_OPERATION error. Modify Section 3.8.6, "Compressed Texture Images" (extend Table 3.16 with the following rows) Compressed Internal Formats Base Internal Format =========================== ==================== COMPRESSED_RGB_S3TC_DXT1_EXT RGB COMPRESSED_RGBA_S3TC_DXT1_EXT RGBA COMPRESSED_RGBA_S3TC_DXT3_EXT RGBA COMPRESSED_RGBA_S3TC_DXT5_EXT RGBA (Replace the first paragraph) Texture images may also be specified or modified using image data already stored in a known compressed image format, such as the ETC2/EAC/DXT1/DXT3/DXT5 formats defined in appendix C, or additional formats defined by GL extensions. (Replace paragraph starting with: If internalformat is one of the ETC2/EAC formats described) If internalformat is one of the ETC2/EAC/DXT1/DXT3/DXT5 formats described in table 3.16, the compressed image data is stored using one of the ETC2/EAC/DXT1/DXT3/DXT5 compressed texture image encodings (see appendix C). The ETC2/EAC/DXT1/DXT3/DXT5 texture compression algorithm supports only two-dimensional images. If internalformat is an ETC2/EAC/DXT1/DXT3/DXT5 format, CompressedTexImage3D will generate an INVALID_OPERATION error if target is not TEXTURE_2D_ARRAY. (Add at the end of the chapter) If the internal format is one of COMPRESSED_RGB_S3TC_DXT1_EXT, COMPRESSED_RGBA_S3TC_DXT1_EXT, COMPRESSED_RGBA_S3TC_DXT3_EXT, or COMPRESSED_RGBA_S3TC_DXT5_EXT, the compressed texture is stored using one of several S3TC compressed texture image formats and is easily edited along 4x4 texel boundaries. In this case, CompressedTexSubImage2D/CompressedTexSubImage3D will result in an INVALID_OPERATION error if one of the following conditions occurs: * is not a multiple of four, and plus is not equal to texture width; * is not a multiple of four, and plus is not equal to texture height; or * or is not a multiple of four. For any other formats, calling CompressedTexSubImage2D/CompressedTexSubImage3D will result in an INVALID_OPERATION error if or is not equal to zero, or if and do not match the width and height of the texture, respectively. The contents of any texel outside the region modified by the call are undefined. These restrictions may be relaxed for other specific compressed internal formats whose images are easily modified. Additions to the AGL/GLX/WGL Specifications None. GLX Protocol None. Dependencies on OpenGL 2.0 or ARB_texture_non_power_of_two If OpenGL 2.0 or ARB_texture_non_power_of_two is supported, compressed texture images can have sizes that are neither multiples of four nor small values like one or two. The original version of this specification didn't allow TexSubImage2D and CompressedTexSubImage2D to update only a portion of such images. The spec has been updated to allow such edits in the spirit of the resolution of issue (3). See the "Implementation Note" section for more details. Errors for OpenGL 1.2.1 Specification INVALID_ENUM is generated by CompressedTexImage1D or CompressedTexImage3D if is COMPRESSED_RGB_S3TC_DXT1_EXT, COMPRESSED_RGBA_S3TC_DXT1_EXT, COMPRESSED_RGBA_S3TC_DXT3_EXT, or COMPRESSED_RGBA_S3TC_DXT5_EXT. INVALID_OPERATION is generated by CompressedTexImage2D if is COMPRESSED_RGB_S3TC_DXT1_EXT, COMPRESSED_RGBA_S3TC_DXT1_EXT, COMPRESSED_RGBA_S3TC_DXT3_EXT, or COMPRESSED_RGBA_S3TC_DXT5_EXT and is not equal to zero. INVALID_ENUM is generated by CompressedTexSubImage1D or CompressedTexSubImage3D if is COMPRESSED_RGB_S3TC_DXT1_EXT, COMPRESSED_RGBA_S3TC_DXT1_EXT, COMPRESSED_RGBA_S3TC_DXT3_EXT, or COMPRESSED_RGBA_S3TC_DXT5_EXT. INVALID_OPERATION is generated by TexSubImage2D or CopyTexSubImage2D if TEXTURE_INTERNAL_FORMAT is COMPRESSED_RGB_S3TC_DXT1_EXT, COMPRESSED_RGBA_S3TC_DXT1_EXT, COMPRESSED_RGBA_S3TC_DXT3_EXT, or COMPRESSED_RGBA_S3TC_DXT5_EXT and any of the following apply: * is not a multiple of four, plus is not equal to TEXTURE_WIDTH, and either or is non-zero; * is not a multiple of four, plus is not equal to TEXTURE_HEIGHT, and either or is non-zero; or * or is not a multiple of four. INVALID_OPERATION is generated by CompressedTexSubImage2D if TEXTURE_INTERNAL_FORMAT is COMPRESSED_RGB_S3TC_DXT1_EXT, COMPRESSED_RGBA_S3TC_DXT1_EXT, COMPRESSED_RGBA_S3TC_DXT3_EXT, or COMPRESSED_RGBA_S3TC_DXT5_EXT and any of the following apply: * is not a multiple of four, and plus is not equal to TEXTURE_WIDTH; * is not a multiple of four, and plus is not equal to TEXTURE_HEIGHT; or * or is not a multiple of four. The following restrictions from the ARB_texture_compression specification do not apply to S3TC texture formats, since subimage modification is straightforward as long as the subimage is properly aligned. DELETE: INVALID_OPERATION is generated by TexSubImage1D, TexSubImage2D, DELETE: TexSubImage3D, CopyTexSubImage1D, CopyTexSubImage2D, or DELETE: CopyTexSubImage3D if the internal format of the texture image is DELETE: compressed and , , or does not equal DELETE: -b, where b is value of TEXTURE_BORDER. DELETE: INVALID_VALUE is generated by CompressedTexSubImage1DARB, DELETE: CompressedTexSubImage2DARB, or CompressedTexSubImage3DARB if the DELETE: entire texture image is not being edited: if , DELETE: , or is greater than -b, + is DELETE: less than w+b, + is less than h+b, or DELETE: + is less than d+b, where b is the value of DELETE: TEXTURE_BORDER, w is the value of TEXTURE_WIDTH, h is the value of DELETE: TEXTURE_HEIGHT, and d is the value of TEXTURE_DEPTH. See also errors in the GL_ARB_texture_compression specification. Errors for OpenGL ES 2.0.25 Specification INVALID_OPERATION is generated by CopyTexSubImage2D if the texture image bound to has internal format COMPRESSED_RGB_S3TC_DXT1_EXT, COMPRESSED_RGBA_S3TC_DXT1_EXT, COMPRESSED_RGBA_S3TC_DXT3_EXT, or COMPRESSED_RGBA_S3TC_DXT5_EXT. INVALID_OPERATION is generated by CompressedTexSubImage2D if is COMPRESSED_RGB_S3TC_DXT1_EXT, COMPRESSED_RGBA_S3TC_DXT1_EXT, COMPRESSED_RGBA_S3TC_DXT3_EXT, or COMPRESSED_RGBA_S3TC_DXT5_EXT and any of the following apply: * is not a multiple of four, and plus is not equal to the texture width; * is not a multiple of four, and plus is not equal to the texture height; or * or is not a multiple of four. INVALID_OPERATION is generated by TexImage2D and TexSubImage2D if texture has internal format COMPRESSED_RGB_S3TC_DXT1_EXT, COMPRESSED_RGBA_S3TC_DXT1_EXT, COMPRESSED_RGBA_S3TC_DXT3_EXT, or COMPRESSED_RGBA_S3TC_DXT5_EXT and any of the following apply: * or are not multiples of 4 * is not a multiple of 4 and + is not equal to the width of the LOD * if is not a multiple of 4 and + is not equal to the height of the LOD Errors for OpenGL ES 3.0.2 Specification INVALID_OPERATION is generated by CopyTexSubImage2D / CopyTexSubImage3D if the texture image bound to has internal format COMPRESSED_RGB_S3TC_DXT1_EXT, COMPRESSED_RGBA_S3TC_DXT1_EXT, COMPRESSED_RGBA_S3TC_DXT3_EXT, or COMPRESSED_RGBA_S3TC_DXT5_EXT. INVALID_OPERATION is generated by CompressedTexSubImage2D / CopressedTexSubImage3D if is COMPRESSED_RGB_S3TC_DXT1_EXT, COMPRESSED_RGBA_S3TC_DXT1_EXT, COMPRESSED_RGBA_S3TC_DXT3_EXT, or COMPRESSED_RGBA_S3TC_DXT5_EXT and any of the following apply: * is not a multiple of four, and plus is not equal to the texture width; * is not a multiple of four, and plus is not equal to the texture height; or * or is not a multiple of four. INVALID_OPERATION is generated by TexImage2D/TexImage3D and TexSubImage2D/TexSubimage3D if texture has internal format COMPRESSED_RGB_S3TC_DXT1_EXT, COMPRESSED_RGBA_S3TC_DXT1_EXT, COMPRESSED_RGBA_S3TC_DXT3_ETX, or COMPRESSED_RGBA_S3TC_DXT5_EXT and is not RGB or RGBA, or any of the following apply: * or are not multiples of 4 * is not a multiple of 4 and + is not equal to the width of the LOD * if is not a multiple of 4 and + is not equal to the height of the LOD New State for OpenGL 1.2.1 Specification In the "Textures" state table, increment the TEXTURE_INTERNAL_FORMAT subscript for Z by 4 in the "Type" row. New State for OpenGL ES 2.0.25 and 3.0.2 Specifications The queries for NUM_COMPRESSED_TEXTURE_FORMATS and COMPRESSED_TEXTURE_FORMATS include COMPRESSED_RGB_S3TC_DXT1_EXT, COMPRESSED_RGBA_S3TC_DXT1_EXT, COMPRESSED_RGBA_S3TC_DXT3_EXT, and COMPRESSED_RGBA_S3TC_DXT5_EXT. New Implementation Dependent State None Appendix in OpenGL 1.2.1 Appendix C.2 in OpenGL ES 3.0.2 S3TC Compressed Texture Image Formats Compressed texture images stored using the S3TC compressed image formats are represented as a collection of 4x4 texel blocks, where each block contains 64 or 128 bits of texel data. The image is encoded as a normal 2D raster image in which each 4x4 block is treated as a single pixel. If an S3TC image has a width or height that is not a multiple of four, the data corresponding to texels outside the image are irrelevant and undefined. When an S3TC image with a width of , height of , and block size of (8 or 16 bytes) is decoded, the corresponding image size (in bytes) is: ceil(/4) * ceil(/4) * blocksize. When decoding an S3TC image, the block containing the texel at offset (, ) begins at an offset (in bytes) relative to the base of the image of: blocksize * (ceil(/4) * floor(/4) + floor(/4)). The data corresponding to a specific texel (, ) are extracted from a 4x4 texel block using a relative (x,y) value of ( modulo 4, modulo 4). There are four distinct S3TC image formats: COMPRESSED_RGB_S3TC_DXT1_EXT: Each 4x4 block of texels consists of 64 bits of RGB image data. Each RGB image data block is encoded as a sequence of 8 bytes, called (in order of increasing address): c0_lo, c0_hi, c1_lo, c1_hi, bits_0, bits_1, bits_2, bits_3 The 8 bytes of the block are decoded into three quantities: color0 = c0_lo + c0_hi * 256 color1 = c1_lo + c1_hi * 256 bits = bits_0 + 256 * (bits_1 + 256 * (bits_2 + 256 * bits_3)) color0 and color1 are 16-bit unsigned integers that are unpacked to RGB colors RGB0 and RGB1 as though they were 16-bit packed pixels with a of RGB and a type of UNSIGNED_SHORT_5_6_5. bits is a 32-bit unsigned integer, from which a two-bit control code is extracted for a texel at location (x,y) in the block using: code(x,y) = bits[2*(4*y+x)+1 .. 2*(4*y+x)+0] where bit 31 is the most significant and bit 0 is the least significant bit. The RGB color for a texel at location (x,y) in the block is given by: RGB0, if color0 > color1 and code(x,y) == 0 RGB1, if color0 > color1 and code(x,y) == 1 (2*RGB0+RGB1)/3, if color0 > color1 and code(x,y) == 2 (RGB0+2*RGB1)/3, if color0 > color1 and code(x,y) == 3 RGB0, if color0 <= color1 and code(x,y) == 0 RGB1, if color0 <= color1 and code(x,y) == 1 (RGB0+RGB1)/2, if color0 <= color1 and code(x,y) == 2 BLACK, if color0 <= color1 and code(x,y) == 3 Arithmetic operations are done per component, and BLACK refers to an RGB color where red, green, and blue are all zero. Since this image has an RGB format, there is no alpha component and the image is considered fully opaque. COMPRESSED_RGBA_S3TC_DXT1_EXT: Each 4x4 block of texels consists of 64 bits of RGB image data and minimal alpha information. The RGB components of a texel are extracted in the same way as COMPRESSED_RGB_S3TC_DXT1_EXT. The alpha component for a texel at location (x,y) in the block is given by: 0.0, if color0 <= color1 and code(x,y) == 3 1.0, otherwise IMPORTANT: When encoding an RGBA image into a format using 1-bit alpha, any texels with an alpha component less than 0.5 end up with an alpha of 0.0 and any texels with an alpha component greater than or equal to 0.5 end up with an alpha of 1.0. When encoding an RGBA image into the COMPRESSED_RGBA_S3TC_DXT1_EXT format, the resulting red, green, and blue components of any texels with a final alpha of 0.0 will automatically be zero (black). If this behavior is not desired by an application, it should not use COMPRESSED_RGBA_S3TC_DXT1_EXT. This format will never be used when a generic compressed internal format (Table 3.16.2) is specified, although the nearly identical format COMPRESSED_RGB_S3TC_DXT1_EXT (above) may be. COMPRESSED_RGBA_S3TC_DXT3_EXT: Each 4x4 block of texels consists of 64 bits of uncompressed alpha image data followed by 64 bits of RGB image data. Each RGB image data block is encoded according to the COMPRESSED_RGB_S3TC_DXT1_EXT format, with the exception that the two code bits always use the non-transparent encodings. In other words, they are treated as though color0 > color1, regardless of the actual values of color0 and color1. Each alpha image data block is encoded as a sequence of 8 bytes, called (in order of increasing address): a0, a1, a2, a3, a4, a5, a6, a7 The 8 bytes of the block are decoded into one 64-bit integer: alpha = a0 + 256 * (a1 + 256 * (a2 + 256 * (a3 + 256 * (a4 + 256 * (a5 + 256 * (a6 + 256 * a7)))))) alpha is a 64-bit unsigned integer, from which a four-bit alpha value is extracted for a texel at location (x,y) in the block using: alpha(x,y) = bits[4*(4*y+x)+3 .. 4*(4*y+x)+0] where bit 63 is the most significant and bit 0 is the least significant bit. The alpha component for a texel at location (x,y) in the block is given by alpha(x,y) / 15. COMPRESSED_RGBA_S3TC_DXT5_EXT: Each 4x4 block of texels consists of 64 bits of compressed alpha image data followed by 64 bits of RGB image data. Each RGB image data block is encoded according to the COMPRESSED_RGB_S3TC_DXT1_EXT format, with the exception that the two code bits always use the non-transparent encodings. In other words, they are treated as though color0 > color1, regardless of the actual values of color0 and color1. Each alpha image data block is encoded as a sequence of 8 bytes, called (in order of increasing address): alpha0, alpha1, bits_0, bits_1, bits_2, bits_3, bits_4, bits_5 The alpha0 and alpha1 are 8-bit unsigned bytes converted to alpha components by multiplying by 1/255. The 6 "bits" bytes of the block are decoded into one 48-bit integer: bits = bits_0 + 256 * (bits_1 + 256 * (bits_2 + 256 * (bits_3 + 256 * (bits_4 + 256 * bits_5)))) bits is a 48-bit unsigned integer, from which a three-bit control code is extracted for a texel at location (x,y) in the block using: code(x,y) = bits[3*(4*y+x)+2 .. 3*(4*y+x)+0] where bit 47 is the most significant and bit 0 is the least significant bit. The alpha component for a texel at location (x,y) in the block is given by: alpha0, code(x,y) == 0 alpha1, code(x,y) == 1 (6*alpha0 + 1*alpha1)/7, alpha0 > alpha1 and code(x,y) == 2 (5*alpha0 + 2*alpha1)/7, alpha0 > alpha1 and code(x,y) == 3 (4*alpha0 + 3*alpha1)/7, alpha0 > alpha1 and code(x,y) == 4 (3*alpha0 + 4*alpha1)/7, alpha0 > alpha1 and code(x,y) == 5 (2*alpha0 + 5*alpha1)/7, alpha0 > alpha1 and code(x,y) == 6 (1*alpha0 + 6*alpha1)/7, alpha0 > alpha1 and code(x,y) == 7 (4*alpha0 + 1*alpha1)/5, alpha0 <= alpha1 and code(x,y) == 2 (3*alpha0 + 2*alpha1)/5, alpha0 <= alpha1 and code(x,y) == 3 (2*alpha0 + 3*alpha1)/5, alpha0 <= alpha1 and code(x,y) == 4 (1*alpha0 + 4*alpha1)/5, alpha0 <= alpha1 and code(x,y) == 5 0.0, alpha0 <= alpha1 and code(x,y) == 6 1.0, alpha0 <= alpha1 and code(x,y) == 7 Implementation Note This extension allows TexSubImage2D and CompressedTexSubImage2D to perform partial updates to compressed images, but generally requires that the updated area be aligned to 4x4 block boundaries. If the width or height is not a multiple of four, there will be 4x4 blocks at the edge of the image that contain "extra" texels that are not part of the image. This spec has an exception allowing edits that partially cover such blocks as long as the edit covers all texels in the block belonging to the image. For example, in a 2D texture of size 70x50, it is legal to update the single partial block covering the four texels from (68,48) to (69,49) by setting (, ) to (68,48) and and to 2. When this extension was originally written, non-bordered textures were required to have widths and heights that were powers of two. Therefore, the only cases where partial blocks could occur were if the width or height of the texture image was one or two. The original spec language allowed partial block edits only if the width or height of the region edited was equal to the full texture size. That language didn't handle cases such as the 70x50 example above. This specification was updated in April, 2009 to allow such edits. Multiple OpenGL implementers correctly implemented the original restriction, and partial edits that include partially covered tiles will result in INVALID_OPERATION errors on older drivers. NVIDIA Implementation Note NVIDIA GeForce 6 and 7 Series of GPUs (NV4x- and G7x-based GPUs) and their Quadro counterparts (Quadro FX 4000, 4400, 4500; Quadro NVS 440; etc.) do not ignore the order of the 16-bit RGB values color0 and color1 when decoding DXT3 and DXT5 texture formats (i.e., COMPRESSED_RGBA_S3TC_DXT5_EXT and COMPRESSED_RGBA_S3TC_DXT5_EXT). This is at variance with the specification language saying: Each RGB image data block is encoded according to the COMPRESSED_RGB_S3TC_DXT1_EXT format, with the exception that the two code bits always use the non-transparent encodings. In other words, they are treated as though color0 > color1, regardless of the actual values of color0 and color1. With these NV4x and G7x GPUs, when decoding the DXT3 and DXT5 formats, if color0 <= color1 then the code(x,y) values of 2 and 3 encode (RGB0+RGB1)/2 and BLACK respectively (as is the case for DXT1). All other NVIDIA GPUs (those based on GPU designs other than NV4x and G7x) implement DXT3 and DXT5 decoding strictly according to the specification. Specifically, the order of color0 and color1 does not affect the decoding of the DXT3 and DXT5 format, consistent with the specification paragraph cited above. To ensure reliable decoding of DXT3 and DXT5 textures, please avoid encoding an RGB image data block with color0 <= color1 when the block also uses code(x,y) values of 2 and 3. Revision History 1.6 07/15/13 sgrajewski Added OpenGL ES 2.0.25 and 3.0.2 dependencies. 1.5 11/03/09 pbrown Fix typo in the encoding description of the 3-bit "bits" fields in DXT5. 1.4 04/13/09 pbrown Add interaction with non-power-of-two textures from OpenGL 2.0 / ARB_texture_non_power_of_two. Allow CompressedTexSubImage2D to perform edits that include partial tiles at the edge of the image as long as the specified width/height parameters line up with the edge. Thanks to Emil Persson for finding this issue. 1.3 07/07/07 mjk Correct NVIDIA note about DXT3/5 decoding issue. 1.2 01/26/06 mjk Add NVIDIA note about DXT3/5 decoding issue. 1.1, 11/16/01 pbrown: Updated contact info, clarified where texels fall within a single block. 1.0, 07/07/00 prbrown1: Published final version agreed to by working group members. 0.9, 06/24/00 prbrown1: Documented that block-aligned TexSubImage calls do not modify existing texels outside the modified blocks. Added caveat to allow for a (0,0)-anchored TexSubImage operation of arbitrary size. 0.7, 04/11/00 prbrown1: Added issues on DXT1, DXT3, and DXT5 encodings where the MSDN documentation doesn't match what is really done. Added enum values from the extension registry. 0.4, 03/28/00 prbrown1: Updated to reflect final version of the ARB_texture_compression extension. Allowed block-aligned TexSubImage calls. 0.3, 03/07/00 prbrown1: Resolved issues pertaining to the format of RGB blocks in the DXT3 and DXT5 formats (they don't ever use the "transparent" encoding). Fixed decoding of DXT1 blocks. Pointed out issue of "transparent" texels in DXT1 encodings having different behaviors for RGB and RGBA internal formats. 0.2, 02/23/00 prbrown1: Minor revisions; added several issues. 0.11, 02/17/00 prbrown1: Slight modification to error semantics (INVALID_ENUM instead of INVALID_OPERATION). 0.1, 02/15/00 prbrown1: Initial revision.